PRODUCT
PMVFQ Series
PM2 Series
EPM2 Series
All-In-One Series
QSIV-100S Series
Two Stage
Compressor Series
LBPM Series
EPM2 Series
55-110KW / 75-150HP
Ultimate Efficient Inverter Model
Permanent Magnetic VSD Screw Air Compressor
- Energy saving with Inverter
- Super premium efficiency IPM motor (IE4 equiv)
- Morse connection design
- Wide range control
- Innovative cooling system
- Up to 52℃ ambient condition
Motor Power
55 – 110 kw
Discharge Airflow
3.0 – 24.5 m3/min
Pressure
0.7 / 0.8 / 1.0 MPa
Magnetic panel pre-filter.
- Improving the cooling environment by reducing the inflow of foreign substances from the outside.
- Extending the service life of the compressor.
Air cooling system
- Apply a cooling system to ensure that all electrical components operate at optimal temperatures.
- Lower the noise level with minimal enclosed cabinet design and inlet installation.
Energy never waste with
Whenever the compressor’s load decreases and air supply becomes unnecessary, the e-stop function immediately stops the motor without waiting for no load operation. It is an energy saving system that reduces power consumption by restarting the motor only when necessary. The normal inverter unit needs a few minutes to restart to prevent the compressor from starting while the residual pressure is maintained. In order to maintain the pressure, it does not stop on its own and instead operates in an unload standby state. On the other hand, the new EPM Series can be started immediately. It is also possible to shorten the pressure increase time by increasing the air volume through a wide range of controls.
High Performance
Super Premium Efficiency IPM Motor
· IE4 Efficiency Grade
· Oil-cooled motor
· Inverter only
· Permanent magnet synchronous motor
· Protection level is IP65
· Heat resistance 180℃
Special Morse Connection
· Motor-end direct connection
· High efficiency and easy maintenance
· Compact design
· Prepare protective devices for PM Motor
State-of-the-art Screw Airends
· Improved new rotor design
· R&D in Japan
· Minimize pressure loss.
· Large rotor quadruple bearing installed.
· Low speed driving (RPM) guarantees stable driving.
Innovative Motor Oil Cooling Technology
· Oil cooling system.
· Independent roof cooling system.
· Apply an independent cooling fan application.
What You Pay Should Be Only For What You Use
The EPM compressor can adjust the rotational speed of the compressor according to the demand of the factory load that changes from time to time by its own developed algorithm.
Therefore, it provides the exact flow rate and pressure that customers need and can achieve maximum energy savings.
SPECIFICATION
| Model | KW | HP | Capacity (㎥/min) | Pressure (BAR) | Dimension (mm) | Weight (kg) | Size |
|---|---|---|---|---|---|---|---|
| 75EPM2-7 | 55 | 75 | 3.6 – 12 | 7 | 1800*1200*1650 | 1450 | RC2 |
| 75EPM2-8 | 3.3 – 11 | 8 | |||||
| 75EPM2-10 | 3.0 – 10 | 10 | |||||
| 90EPM2-7 | 63 | 90 | 3.8 – 12.7 | 7 | 1800*1200*1650 | 1490 | RC2 |
| 90EPM2-8 | 3.7 – 12.5 | 8 | |||||
| 90EPM2-10 | 3.0 – 10 | 10 | |||||
| 100EPM2-7 | 75 | 100 | 3.8 – 16.3 | 7 | 2280*1500*1950 | 2010 | DN65 |
| 100EPM2-8 | 3.6 – 16 | 8 | |||||
| 100EPM2-10 | 2.9 – 13.7 | 10 | |||||
| 125EPM2-7 | 90 | 125 | 5 – 20 | 7 | 2280*1500*1950 | 2050 | DN65 |
| 125EPM2-8 | 4.2 – 19 | 8 | |||||
| 125EPM2-10 | 3.3 – 16.5 | 10 | |||||
| 150EPM2-7 | 110 | 150 | 7.4 – 24.5 | 7 | 2280*1750*1690 | 2900 | DN80 |
| 150EPM2-8 | 7.2 – 24 | 8 | |||||
| 150EPM2-10 | 6.3 – 21 | 10 |